NO HOT WATER? Follow These EASY Tips
NO HOT WATER? Follow These EASY Tips
Blog Article
Just how do you actually feel about What Would Cause My Electric Water Heater to Stop Working??
Numerous contemporary houses use an electric water heater for their heater, due to its convenience and simplicity of use. Nevertheless, similar to any other electric appliances, problems may occur with its use, all of a sudden. It can be actually irritating to get up to a chilly shower as opposed to a hot one or having your bath with water that isn't hot adequate or perhaps too hot. Whatever the situation might be, hot water heater problems can be quite stressful. The good news is, we have actually made a checklist of possible services to your water heater problems. There are a variety of variables that could cause a lot of these issues, maybe a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the major power supply for safety and security. Whatever the problem is, getting it repaired must not posture too much of an issue if you follow these steps:
Call An Expert:
If after changing all damaged components and resetting your temperature, the water heater still isn't working, you might require to speak to an expert plumber for a professional viewpoint. The problem with your heating unit could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water needed in your home. Whatever the case may be, a professional plumber would certainly aid fix the problem.
Check Your Power Supply:
As fundamental as this may seem, it is extremely required. Without appropriate power, your water heater will not work. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, simply turn it on and off once more. Change any kind of busted or damaged fuse. Check the home appliance with power after these modifications to see if it's now working.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm enough, you may require to examine the temperature level settings on your upper thermostat. Guarantee the breaker is turned off prior to doing anything. Open up the access panel and press the red button for temperature reset above the thermostat. This should help heat the water. Turn the circuit breaker back on as well as inspect if the problem has been dealt with.
Check the Heating Element in the Water Heater:
If it's not a power issue, then try taking a look at your burner if it is still functioning. Test each of your heating elements to make sure the issue isn't with any one of them. If any one of them is damaged, replace that part and then check whether the hot water is back on.
Conclusion
Water heater issues are not constantly significant. Much of them result from small concerns like a blown fuse or damaged burner. Changing the faulty parts must suffice. Nonetheless, if you are still incapable to address the trouble, give a call to your local plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We are very interested in No Hot Water — Water Heater Repair and I'm hoping you appreciated our article. Loved our blog posting? Please share it. Help other people find it. I value reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Book Now
Report this page